SMPP

Send and receive SMS messages using a SMSC (Short Message Service Center).

Metadata

Property	Value
Scheme	`smpp`
Support Level	Stable
Labels	mobile
Version	4.10.2

Maven Dependency

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-smpp</artifactId>
    <version>4.10.2</version>
</dependency>

Endpoint Properties

Name	Type	Default	Description
`host`	string	`localhost`	Hostname for the SMSC server to use.
`port`	integer	`2775`	Port number for the SMSC server to use.
`initialReconnectDelay`	integer	`5000`	Defines the initial delay in milliseconds after the consumer/producer tries to reconnect to the SMSC, after the connection was lost.
`maxReconnect`	integer	`2147483647`	Defines the maximum number of attempts to reconnect to the SMSC, if SMSC returns a negative bind response
`reconnectDelay`	integer	`5000`	Defines the interval in milliseconds between the reconnect attempts, if the connection to the SMSC was lost and the previous was not succeed.
`splittingPolicy`	object	`ALLOW`	You can specify a policy for handling long messages: ALLOW - the default, long messages are split to 140 bytes per message TRUNCATE - long messages are split and only the first fragment will be sent to the SMSC. Some carriers drop subsequent fragments so this reduces load on the SMPP connection sending parts of a message that will never be delivered. REJECT - if a message would need to be split, it is rejected with an SMPP NegativeResponseException and the reason code signifying the message is too long.
`systemType`	string		This parameter is used to categorize the type of ESME (External Short Message Entity) that is binding to the SMSC (max. 13 characters).
`addressRange`	string		You can specify the address range for the SmppConsumer as defined in section 5.2.7 of the SMPP 3.4 specification. The SmppConsumer will receive messages only from SMSC's which target an address (MSISDN or IP address) within this range.
`bridgeErrorHandler`	boolean	`false`	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions (if possible) occurred while the Camel consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. Important: This is only possible if the 3rd party component allows Camel to be alerted if an exception was thrown. Some components handle this internally only, and therefore bridgeErrorHandler is not possible. In other situations we may improve the Camel component to hook into the 3rd party component and make this possible for future releases. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.
`exceptionHandler`	object		To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.
`exchangePattern`	object		Sets the exchange pattern when the consumer creates an exchange.
`destAddr`	string	`1717`	Defines the destination SME address. For mobile terminated messages, this is the directory number of the recipient MS. Only for SubmitSm, SubmitMulti, CancelSm and DataSm.
`destAddrNpi`	integer		Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum)
`destAddrTon`	integer		Defines the type of number (TON) to be used in the SME destination address parameters. Only for SubmitSm, SubmitMulti, CancelSm and DataSm. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated
`lazySessionCreation`	boolean	`false`	Sessions can be lazily created to avoid exceptions, if the SMSC is not available when the Camel producer is started. Camel will check the in message headers 'CamelSmppSystemId' and 'CamelSmppPassword' of the first exchange. If they are present, Camel will use these data to connect to the SMSC.
`messageReceiverRouteId`	string		Set this on producer in order to benefit from transceiver (TRX) binding type. So once set, you don't need to define an 'SMTPP consumer' endpoint anymore. You would set this to a 'Direct consumer' endpoint instead. DISCALIMER: This feature is only tested with 'Direct consumer' endpoint. The behavior with any other consumer type is unknown and not tested.
`numberingPlanIndicator`	integer		Defines the numeric plan indicator (NPI) to be used in the SME. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum)
`priorityFlag`	integer		Allows the originating SME to assign a priority level to the short message. Only for SubmitSm and SubmitMulti. Four Priority Levels are supported: 0: Level 0 (lowest) priority 1: Level 1 priority 2: Level 2 priority 3: Level 3 (highest) priority
`protocolId`	integer		The protocol id
`registeredDelivery`	integer		Is used to request an SMSC delivery receipt and/or SME originated acknowledgements. The following values are defined: 0: No SMSC delivery receipt requested. 1: SMSC delivery receipt requested where final delivery outcome is success or failure. 2: SMSC delivery receipt requested where the final delivery outcome is delivery failure.
`replaceIfPresentFlag`	integer		Used to request the SMSC to replace a previously submitted message, that is still pending delivery. The SMSC will replace an existing message provided that the source address, destination address and service type match the same fields in the new message. The following replace if present flag values are defined: 0: Don't replace 1: Replace
`serviceType`	string		The service type parameter can be used to indicate the SMS Application service associated with the message. The following generic service_types are defined: CMT: Cellular Messaging CPT: Cellular Paging VMN: Voice Mail Notification VMA: Voice Mail Alerting WAP: Wireless Application Protocol USSD: Unstructured Supplementary Services Data
`sourceAddr`	string	`1616`	Defines the address of SME (Short Message Entity) which originated this message.
`sourceAddrNpi`	integer		Defines the numeric plan indicator (NPI) to be used in the SME originator address parameters. The following NPI values are defined: 0: Unknown 1: ISDN (E163/E164) 2: Data (X.121) 3: Telex (F.69) 6: Land Mobile (E.212) 8: National 9: Private 10: ERMES 13: Internet (IP) 18: WAP Client Id (to be defined by WAP Forum)
`sourceAddrTon`	integer		Defines the type of number (TON) to be used in the SME originator address parameters. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated
`typeOfNumber`	integer		Defines the type of number (TON) to be used in the SME. The following TON values are defined: 0: Unknown 1: International 2: National 3: Network Specific 4: Subscriber Number 5: Alphanumeric 6: Abbreviated
`lazyStartProducer`	boolean	`false`	Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel's routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing.
`enquireLinkTimer`	integer	`60000`	Defines the interval in milliseconds between the confidence checks. The confidence check is used to test the communication path between an ESME and an SMSC.
`interfaceVersion`	string	`3.4`	Defines the interface version to be used in the binding request with the SMSC. The following values are allowed, as defined in the SMPP protocol (and the underlying implementation using the jSMPP library, respectively): legacy (0x00), 3.3 (0x33), 3.4 (0x34), and 5.0 (0x50). The default (fallback) value is version 3.4.
`pduProcessorDegree`	integer	`3`	Sets the number of threads which can read PDU and process them in parallel.
`pduProcessorQueueCapacity`	integer	`100`	Sets the capacity of the working queue for PDU processing.
`sessionStateListener`	object		You can refer to a org.jsmpp.session.SessionStateListener in the Registry to receive callbacks when the session state changed.
`singleDLR`	boolean	`false`	When true, the SMSC delivery receipt would be requested only for the last segment of a multi-segment (long) message. For short messages, with only 1 segment the behaviour is unchanged.
`transactionTimer`	integer	`10000`	Defines the maximum period of inactivity allowed after a transaction, after which an SMPP entity may assume that the session is no longer active. This timer may be active on either communicating SMPP entity (i.e. SMSC or ESME).
`alphabet`	integer		Defines encoding of data according the SMPP 3.4 specification, section 5.2.19. 0: SMSC Default Alphabet 4: 8 bit Alphabet 8: UCS2 Alphabet
`dataCoding`	integer		Defines the data coding according the SMPP 3.4 specification, section 5.2.19. Example data encodings are: 0: SMSC Default Alphabet 3: Latin 1 (ISO-8859-1) 4: Octet unspecified (8-bit binary) 8: UCS2 (ISO/IEC-10646) 13: Extended Kanji JIS(X 0212-1990)
`encoding`	string	`ISO-8859-1`	Defines the encoding scheme of the short message user data. Only for SubmitSm, ReplaceSm and SubmitMulti.
`httpProxyHost`	string		If you need to tunnel SMPP through a HTTP proxy, set this attribute to the hostname or ip address of your HTTP proxy.
`httpProxyPassword`	string		If your HTTP proxy requires basic authentication, set this attribute to the password required for your HTTP proxy.
`httpProxyPort`	integer	`3128`	If you need to tunnel SMPP through a HTTP proxy, set this attribute to the port of your HTTP proxy.
`httpProxyUsername`	string		If your HTTP proxy requires basic authentication, set this attribute to the username required for your HTTP proxy.
`proxyHeaders`	object		These headers will be passed to the proxy server while establishing the connection.
`password`	string		The password for connecting to SMSC server.
`systemId`	string	`smppclient`	The system id (username) for connecting to SMSC server.
`usingSSL`	boolean	`false`	Whether using SSL with the smpps protocol